Washington Gas partners with area manufacturers to offer rebates on energy-efficient equipment for homeowners. Manufacturer rebates can also be combined with Washington Gas rebates for additional incentive savings to reduce upfront costs.
Trane Furnace Rebates:
Available from October 1, 2024, to December 31, 2024, Maryland and Virginia customers can receive an additional $300 rebate on select furnace models.
The following tankless water heaters and furnaces can be combined with Washington Gas Home Energy Savings Program rebates:
MD Rebates
Trane High-Efficiency Furnace Model | ||||
|---|---|---|---|---|
Model Name | Equipment Type | Annual Fuel Utilization Efficiency | Trane Rebate | Home Energy Savings Program Rebate |
S9V2 | Furnace Tier 1 | 96% AFUE | $300 | $500 |
S9X2 | Furnace Tier 1 | 96% AFUE | $300 | $500 |
S9X1 | Furnace Tier 1 | 96% AFUE | $300 | $500 |
XC95m | Furnace Tier 2 | 97% AFUE | $300 | $700 |
Customers may also be able to claim a federal tax credit of 30% of the project cost up to $600. Tax credits require exceeding efficiency requirements above, check ENERGY STAR requirements here
VA Rebates
Trane High-Efficiency Furnace Model | ||||
|---|---|---|---|---|
Model Name | Equipment Type | Annual Fuel Utilization Efficiency | Trane Rebate | Home Energy Savings Program Rebate |
S9V2 | Furnace Tier 1 | 96% AFUE | $300 | $400 |
S9X2 | Furnace Tier 1 | 96% AFUE | $300 | $400 |
S9X1 | Furnace Tier 1 | 96% AFUE | $300 | $400 |
XC95m | Furnace Tier 2 | 97% AFUE | $300 | $400 |
Customers may also be able to claim a federal tax credit of 30% of the project cost up to $600. Tax credits require exceeding efficiency requirements above, check ENERGY STAR requirements here
Trane Rebate Eligibility Requirements
To be eligible for this Trane rebate, the furnace must be:
- Purchased between October 1, 2024 – December 31, 2024.
- Installed no later than December 31, 2024.
- Submitted to Trane website no later than January 31, 2025, along with proof of purchase and Washington Gas bill.
- Trane manufacturer rebates cannot be applied to combination heating units.
Contractors will then need to apply separately for the Washington Gas Home Energy Savings rebate at the website here: Washington Gas (programprocessing.com)